Tear-off
Old metal panels, trim and fasteners are removed and taken for recycling.
Metal Roofing
Metal Roof Replacement Fanwood, NJ
A roofer in Fanwood can replace a metal roof that has rusted through, lost its finish or been riddled with worn screw holes, down to the purlins or deck, so the new roof is set up for decades. One call to (908) 663-5020 reaches a nearby roofer who replaces metal roofs.
Replacement comes up once rust or wear has spread past what patches and new fasteners can fix. Widespread rust holes, a worn-out finish and hundreds of stripped fastener holes mean the metal has done its job. Thin panels from decades past are usually the first to rust through.
There are a few ways to replace a metal roof, and the right one depends on what is underneath. Tearing off lets the roofer see rotten purlins, soft decking and rusted fasteners before anything new is installed. A re-cover, or retrofit, installs new metal over the old panels on new sub-framing, which is common on shops and large buildings.
A big share of metal replacement work is switching a worn shingle roof to metal. The shingles can come off or, if local code permits and the deck is sound, the metal can go over them. Have the age, roof type and leak history ready when you call.
If the problem goes deeper than it first looked, a Fanwood roofer may also recommend metal roof installation or metal roof repair.
Dealing with this in Fanwood, NJ right now? Call (908) 663-5020 to talk to a local roofer.
Call nowThe process
The metal roof replacement process
Here is how a metal replacement usually goes.
Inspect the structure
The old roof and the structure beneath it are evaluated for rust, rot and fastener holding power. The findings shape the replacement plan.
Plan the new roof
The roofer and owner pick the panel profile, metal and color and decide how the old roof will be handled. Moving from purlins to standing seam often calls for a full deck.
Strip the panels
Panels and trim come off section by section and go to a metal recycler. The roof is never left open overnight.
Restore the deck
The structure is repaired so new fasteners bite into solid wood. Sound framing is what keeps the new roof fastened.
Install the new metal
High-temperature underlayment, new trim, panels, closures and flashing go on in order from the eaves up. Every edge gets new matching trim.
What is included
What metal roof replacement includes
Retrofit framing
New panels can be installed over existing metal when the structure checks out.
Flashing
All new eave, rake, ridge and wall trim so the details last as long as the panels.
New panels
Fresh metal cut to length for each slope replace the old roof.
Framing repair
Damaged structure is repaired before any new metal is installed.
Related service
Metal Roof Panel Replacement Fanwood, NJ
When only a few panels are rusted through or torn, metal roof panel replacement can keep the rest of the roof in service. On exposed fastener roofs, the roofer removes the screws on the damaged panel and the overlapping edges of its neighbors, slides it out and sets a new one in sealant. Concealed fastener panels take more time to replace because of the seams.
On a Fanwood roof that is otherwise sound, a few new panels can add years of service. The new panels may look brighter until they weather. Too many swaps, and a full reroof is the smarter route.
Related service
Metal Roof Over Shingles Fanwood, NJ
A metal roof over shingles skips the tear-off and installs panels over the current shingle layer. Many codes allow it over a single layer of shingles, and the metal usually goes on over new underlayment, a slip sheet or wood battens.
What you give up is a look at the deck. For Fanwood homes, the attic check is critical, since rotted decking will not hold fasteners. Any sign of rot, or a second layer of shingles, tips the decision to tear-off.
Local help
Metal Roof Replacement Near Me
Metal roof replacement in Fanwood covers old barns and shops as well as homes trading shingles for metal. Older outbuildings in Fanwood and nearby towns like Westfield, Plainfield, Watchung and Mountainside often have thin exposed fastener panels from decades ago, while homes are more often switching from worn shingles to metal, so it pays to have the framing checked before deciding on a re-cover.
For metal roof replacement in Fanwood, NJ or nearby towns like Westfield, Plainfield, Watchung and Mountainside, call (908) 663-5020 to reach a roofer who covers your street.
How the weather here affects roofs around Fanwood
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Fanwood, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why act early
Less damage
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Roofers in Fanwood know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
Metal Roof Replacement questions
How is a single metal roof panel replaced?
Single panel replacement is common on exposed fastener roofs. A new panel of matching profile and gauge goes in with fresh sealant and screws. New panels may look brighter than the old ones at first.
What happens to the old metal roofing?
Old steel and aluminum panels are routinely taken to a scrap metal recycler. Unlike shingles, which usually go to a landfill, metal is sorted and sent for recycling. Your roofer can explain how the old metal will be hauled away.
Is it a good idea to put metal over shingles?
Where code permits, metal can go over a single layer of shingles. It saves tear-off and disposal, but it hides the deck, so the attic should be checked for rot and soft spots first. If the deck is questionable or there are two layers already, a tear-off is the better route.
Can a new metal roof go over the old metal roof?
A retrofit, or re-cover, installs new metal over the existing panels using a sub-framing system. It avoids tear-off and keeps the building closed during work, which is why it is common on shops, barns and commercial buildings. The structure has to be checked first, since the old roof stays in place and adds weight.
When does a metal roof need replacing instead of repair?
The tipping point comes when rust or wear is spread across the roof, not just in a few spots. Widespread rust-through, failed paint and stripped holes everywhere usually mean new metal. A roofer can tell you which sections can be saved after a look at the roof and the framing.
More questions? Call (908) 663-5020
Often needed together
Metal Roof Installation
Choosing and installing a metal roof, from panel type and gauge to underlayment, trim and closures, for homes, garages and outbuildings.
Learn moreMetal Roof Repair
Metal roof repairs that stop leaks at the screws, laps and flashing, matched to exposed fastener and standing seam roofs alike.
Learn moreRoof Replacement
A complete new roof from the deck up when repairs no longer make sense, with the old layers removed and the deck checked.
Learn moreStanding Seam Metal Roof
Standing seam metal roofing installed, repaired and detailed for thermal movement, for homes, additions and low slope roofs.
Learn more
Looking for something else?
See all roofing servicesNeed metal roof replacement in Fanwood, NJ?
Call (908) 663-5020 for a local roofer in Fanwood and nearby towns.